| Customization: | Available |
|---|---|
| Integrated Graphics: | Integrated Graphics |
| Main Chipset: | Intel |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Motherboard | 170mm(L)*170mm(W)*22mm(H) | |
| CPU | Supports Intel Alder Lake-N series N200, N100, N97, N95, i3-N305, etc | |
| Memory | 1*NB-DDR4 SODIMM Memory slot, supports single channel 3200MHz memory, low voltage 1.2V, maximum support 16GB | |
| power supply | 1*DC_JACK | Supports 12V voltage, with a DC head inner diameter of 2.5mm The full load power consumption of the motherboard is about 30W. Suggest using a 12V/4A or higher power supply |
| 1*DC_PWR(4Pin) | ||
| display function | Intel UHD Graphics,Support single display, dual display/triple display replication, dual display/triple display expansion | |
| 1*VGA DB15 interface | Supports a resolution of 1920* 1080@60Hz | |
| 1*DP interface(Optional) | DP Not supporting DP++, supporting 4K resolution 4096/3840* 2160@60Hz | |
| VGA interface can be changed to be DP interface | ||
| 1*HDMI 2.0 interface | 4K resolution 4096/3840*2160@60Hz | |
| 1*HDMI_CON pin | 4K resolution 4096/3840*2160@60Hz (16Pin,2*8Pin,2.0mm) | |
| 1*LVDS/EDP1 pin | Support resolution 1920*1080@60Hz (30Pin,2*15Pin,2.0mm | |
| LVDS and EDP1 are optional, sharing pins. EDP1 does not support 4K resolution and uses EDP-B screen cable | ||
| 1*VCC_SEL pin | LVDS/EDP1 voltage control pin (6Pin,2*3Pin,2.0mm) | |
| 1*BKLT_CONN pin | LVDS/EDP1 Backlight switch control pin (6Pin,1*6Pin,2.0mm) | |
| 1*EDP2 pin | Using EDP-A screen cable, supporting resolution 1920*1080@60Hz (30Pin,2*15Pin,2.0mm) | |
| Network function | 1/2*RJ45 LANinterface | Single network: default Realtek 8111H Gigabit Ethernet card; Optional Yutaiwei YT6801 Gigabit Ethernet Card; Dual network: supports Realtek 8111H+Realtek 8111H Gigabit Ethernet cards; Optional Yutaiwei YT6801+Yutaiwei YT6801 Gigabit Network Card; Support network wake-up and PXE diskless boot function |
| 1*M2_WIFIinterface | PCIE3.0 signal, supports Key Interface M.2 2230 WiFi Bluetooth module | |
| Hard disk function | 1*SATA interface | Standard SATA 3.0 hard drive interface |
| 1*NGFF(M.2)interface | PCIE3.0 signal, supports Key Interface default M.2 2280 hard drive, optional M.2 2242 hard drive, default supports NVME (PCIE) protocol, hardware can be changed to support SATA protocol | |
| 1*SATA_PWR pin | Hard disk power supply pin, capable of supplying 5V and 12V power (4Pin,1*4Pin,2.54mm) | |
| Sound function | Default support for Realtek ALC897 HD digital audio decoder and 6-channel high fidelity audio controller | |
| 1*LINE_OUTinterface | Supports audio output (green) | |
| 1*MIC_INinterface | Supports microphone input (red) | |
| 1*JAMP pin | The amplifier supports dual channel output with 8 ohms and 5 watts speakers (4Pin,1*4Pin,2.0mm) | |
| 1*F_AUDIO pin | Standard audio pin (9Pin,2*5Pin,2.54mm) | |
| USB function | 2*USB3.2interface | Rear standard USB 3.2 Geni interface, with a maximum transmission bandwidth of 5Gbps |
| 2*USB2.0interface | Rear standard USB 2.0 interface, maximum transmission bandwidth of 480Mbps | |
| 1*F_USB1 pin | Front USB 2.0 pins, one set with 2 * USB 2.0 (9Pin,2*5Pin,2.54mm) | |
| 1*F_USB2 pin | Front USB 2.0 pins, one set with 2 * USB 2.0 (9Pin,2*5Pin,2.54mm) | |
| SWITCH | 1*F_PANEL pin | Switch, power light, hard drive light, restart pin (9Pin,2*5Pin,2.54mm) |
| 1*JATX pin | Support hardware control for power on and startup (3Pin,1*3Pin,2.0mm) |
|
| Other I/O | COM1~6 pin | Serial port, supports RS232 by default (9Pin,2*5Pin,2.54mm) |
| COM7~10 pin (Optional) | Serial port, default support RS232 (3Pin,1*3Pin,2.0mm) | |
| COM3/4 pin | Serial port, optional support for RS232/422/485 (9Pin,2*5Pin,2.54mm) | |
| COM2/6 pin | Serial port, optional support for RS232/485 (9Pin,2*5Pin,2.54mm) | |
| 1*JPCOM1/2 pin | Can control the ninth pin voltage of COM1/2 to 0V/5V/12 (6Pin,2*3Pin,2.0mm) |
|
| All serial ports can be modified and hardware supports TTL | ||
| 1*JLPT pin | Parallel printing, standard printing (25Pin,2*13Pin,2.0mm) | |
| 1*CLR_CMOS pin | Motherboard reset and discharge pin (2Pin,1*2Pin,2.54mm) | |
| 1*FAN1 pin | CPU Fan pin, supports temperature control (3Pin,1*3Pin,2.54mm) | |
| 1*FAN2 pin | System fan pin, does not support temperature control(3Pin,1*3Pin,2.54mm) | |
| 1*J1 pin | Debugging pin (10Pin,2*5Pin,2.0mm) | |
| Operating environment | Working temperature: -10 ºC~60 ºC; Working humidity: 5%~95% relative humidity, no condensation | |
| BIOS | AMI BIOS,Support timed startup and intelligent recognition of remote power on/off devices | |
| Watch Dog | Watchdog programming, supports hardware reset function (256 levels, 0-255 seconds) | |
| operating system | Supports Windows 11, Windows 10, Linux, etc (N100 and i3-N300 support Windows 10, Windows 11 22H2, and 23H2 versions) |
|
Company Information
In the year of 2009,Shenzhen Elsky Technology Co.,Ltd. is specially engaged in the research,production and sales of all kinds of mini-ITS motherboard and mini PC for POS,ALL-IN-ONE PC,Digital signage,Advertising LCD Player,Network,Telecommunication and other industries.Meanwhile,we have OEM/ODM service for global customers.
As a motherboard and mini pc manufacture, ELSKY concern with the design,development and production more than 7 year's, We won the CCTV Securities Information Optimizing Brand. and the menbers of Intel Intelligent Manufacture in China and the member of Intel IoT Solutions Alliance.
certificates:
){kind=link}