Customization: | Available |
---|---|
Integrated Graphics: | Integrated Graphics |
Main Chipset: | Intel |
Still deciding? Get samples of US$ 1/piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Motherboard Model | NANO1F | |
Size | 120mm(L)*120mm(W)*27mm(H) | |
CPU | Supports Intel Alder Lake-N series N200, N100, N97, N95, i3-N305, etc | |
RAM | 1 * NB-DDR4 SODIMM memory slot, supports single channel 3200MHz memory, low voltage 1.2V, maximum support 16GB | |
Power Supply | 1*DC_JACK | Supports 12-24V wide voltage power supply, with a DC head inner diameter of 2.5MM The full load power consumption of the motherboard is about 30W. Suggest using a 12V/4A or higher power supply |
1*DC_PWR(Optional) | ||
DC-IN and DC_TX are two options, and the motherboard supports DC-IN by default | ||
Display function | Intel UHD Graphics,Support single display, dual display/triple display replication, dual display/triple display expansion | |
1*HDMI1 2.0 Interface | Supports 4K resolution of 4096/3840* 2160@60Hz | |
1*VGA DB15 Interface | Supports a resolution of 1920* 1080@60Hz | |
1*HDMI 2.0 Interface(Optional) | Supports 4K resolution of 4096/3840* 2160@60Hz | |
VGA Interface Can be modified to support HDMI Interface | ||
1*LVDS/EDP Pin | Supports a resolution of 1920* 1080@60Hz (30Pin,2*15Pin,2.0mm) | |
1*VCC_SEL Pin | LVDS/EDP Pin for voltage control (6Pin,2*3Pin,2.0mm) | |
1*BKLT_CONN Pin | LVDS/EDP1 Backlight switch control pin (6Pin,1*6Pin,2.0mm) | |
The motherboard has a choice between LVDS and EDP. LVDS is supported by default, but EDP can be changed to use EDP-B screen cable | ||
Network function | 1/2*RJ45 LAN Interface | Single network: default Realtek 8111H Gigabit Ethernet card; Optional Yutaiwei YT6801 Gigabit Ethernet Card; Dual network: supports Realtek 8111H+Realtek 8111H Gigabit Ethernet cards; Optional Yutaiwei YT6801+Yutaiwei YT6801 Gigabit Network Card; Support network wake-up and PXE diskless boot function |
1*M2_WIFI Interface | PCIE3.0 signal, supports Key-E Interface M.2 2230 WiFi Bluetooth module | |
Hard disk function | 1*NGFF(M.2) Interface | PCIE3.0 signal, supports Key-M Interface default M.2 2280 hard drive, supports NVME (PCIE) protocol by default, hardware can be changed to support SATA protocol |
1*SATA1 Interface | Standard SATA 3.0 hard drive interface, maximum transfer speed of 6.0 Gbps | |
1*SATA_PWR1 Pin | The hard drive power supply pin can be powered by 5V or 12V. (4Pin,1*4Pin,2.54mm) | |
Sound function | Integrated Realtek ALC897 HD digital audio decoder, 6-channel high fidelity audio controller | |
1*LIN_OUT Interface | Supports audio output (green) | |
1*MIC_IN Interface | Supports microphone input (red) | |
1*JAMP Pin | The amplifier supports dual channel output with 8 ohms and 5 watts speakers (4Pin,1*4Pin,2.0mm) | |
1*F_AUDIO Pin | Standard audio Pin (9Pin,2*5Pin,2.0mm) | |
USB function | 2*USB3.2 Interface | Rear standard USB 3.2 Geni Interface, with a maximum transmission bandwidth of 5Gbps |
4*USB2.0 Interface | Rear standard USB 2.0 interface, with a maximum transmission bandwidth of 480Mbps | |
1*F_USB1 Pin | Front USB 2.0 pins, one set with 2 * USB 2.0 (9Pin,2*5Pin,2.0mm) | |
1*F_USB2 Pin | Front USB 2.0 pins, one set with 2 * USB 2.0 (9Pin,2*5Pin,2.0mm) | |
Switch function | 1*F_PANEL Pin | Switch, power light, hard disk light, restart pin (9Pin,2*5Pin,2.0mm) |
1*PWR_SW Button | switch button | |
1*JATX Pin | Support hardware control for power on and startup (3Pin,1*3Pin,2.0mm) |
|
Other I/O | 1*COM1 Pin | Serial port, only supports RS232 (9Pin,2*5Pin,2.0mm) |
1*COM2 Pin | Serial port, optional support for RS232/RS422/RS485 (9Pin,2*5Pin,2.0mm) | |
1*JPCOM1/2 Pin | Control COM1/2 pin 9 voltage 0V/5V/12V optional (6Pin,2*3Pin,2.0mm) | |
1*CLR_CMOS Pin | Clearing the motherboard and discharging pins (2Pin,1*2Pin,2.54mm) |
|
1*CPU_FAN Pin | CPU Fan Pin, supports temperature control (4Pin,1*4Pin,1.25mm) | |
1*GPIO_CN Pin | Standard GPIO Pin (10Pin,2*5Pin,2.0mm) | |
1*J1 Pin | Debugging Pin (10Pin,2*5Pin,2.0mm) | |
1*J2 Pin | Devices that support SPI protocol or I2C protocol (10Pin,2*5Pin,2.0mm) | |
Operating environment | Working temperature: -10 ºC~60 ºC; Working humidity: 5%~95% relative humidity, no condensation | |
BIOS | AMI BIOS,Support power on, timed power on, and intelligent recognition of remote power on/off devices | |
Watch Dog | Watchdog programming, supports hardware reset function (256 levels, 0-255 seconds) | |
operating system | Supports Windows 11, Windows 10, Linux, etc (N100 and i3-N300 do not support Windows 11) |
CPU Brand | CPU Model | Main frequency | Maximum Rui frequency | CPU power consumption | The full load power consumption of the entire board |
Intel Core | i3-N300 | Eight nuclei 0.8G | 3.80G | 7W | 20W |
i3-N305 | Eight nuclei 1.8G | 3.80G | 15W | 40W | |
Intel | N50 | 3.40G | 6W | 20W | |
N95 | Quad nucleus 1.7G | 3.40G | 15W | 40W | |
N97 | Quad nucleus 2.0G | 3.60G | 12W | 35W | |
N100 | Quad nucleus 0.8G | 3.40G | 6W | 20W | |
N200 | Quad nucleus 1.0G | 3.70G | 6W | 20W |
Packaging
Before delivery,we guarantee that every item will be tested and carefully packed with individual Anti-static bubble bag and separated by stiff cardboards in carton boxes.
1Piece/Carton(G.W. : 1.0-1.5KG);
5Pieces/Carton(G.W. : 5.0-7.5KG);
10Pieces/Carton(G.W. : 10.0-15.0KG);
Shipping
3 working days after received full payment(In stock).
Express:DHL,Fedex,UPS,TNT,etc.
Company Informaton
In the year of 2009,Shenzhen Elsky Technology Co.,Ltd. is specially engaged in the research,production and sales of all kinds of mini-ITX motherboard and mini PC for POS,ALL-IN-ONE PC,Digital signage,Advertising LCD Player,Network,Telecommunication and other industries.Meanwhile,we have OEM/ODM service for global customers.
As a motherboard and mini PC manufacturer, ELSKY concern with the design,development and production more than 10 years, We won the CCTV Securities Information Optimizing Brand and the members of Intel Intelligent Manufacture in China and the member of Intel IoT Solutions Alliance.