| Customization: | Available |
|---|---|
| Integrated Graphics: | Integrated Graphics |
| Maximum Memory Capacity: | 4G |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Motherboard model | EK8800 | Motherboard size | 146mm*100mm*12mm | ||||
| CPU | Rockchip RK3288, Cortex-A17 quad-core, clocked at 1.8GHz | ||||||
| Running memory | 2G (4G optional) | ||||||
| Built-in storage | 8G (16G optional) | ||||||
| power supply | 1*DC_IN | Support 12V voltage, DC head inner diameter is 2.0MM The power consumption of the motherboard is about 15W at full load, and it is recommended to use a 12V/3A or above power supply |
|||||
| 1*PWR1 port | |||||||
| Display function | Motherboard HDMI/EDP/LVDS supports single display, dual display copy, dual display expansion | ||||||
| 1*HDMI 1.4 port | Support resolution 3840x2160@30HZ | ||||||
| 1*HDMI_IN port | It will be reserved and it is not available by default | ||||||
| 1*EDP pin | Support resolution 1920*1080@60HZ (30Pin,2*15Pin,2.0mm) | ||||||
| 1*LVDS_PWR2 | EDP1 Working voltage control pin (6Pin,1*6Pin,2.0mm) | ||||||
| 1*LVDS pin | Support resolution1920 * 1080@60Hz (40Pin,2*20Pin,2.0mm) | ||||||
| 1*INVERT pin | LVDS Backlight switch control pin (6Pin,1*6Pin,2.0mm) | ||||||
| 1*LVDS_PWR1pin | LVDS Working voltage control pin (6Pin,2*3Pin,2.0mm) | ||||||
| Internet function | 1*RJ45 LAN port | Integrated Realtek 8211E Gigabit Ethernet chip | |||||
| 1*4G/WIFI port | Only support 3G/4G module, support Huawei, Quectel Mini PCI-E 3G/4G module | ||||||
| 1*WiFi_ANT1 port | Built-in AP6255 WiFi/Bluetooth combo module | ||||||
| Sound function | Integrated ES8336 two-in-one audio controller | ||||||
| 1*LIN_OUT port | 3.5mm standard interface, supports one-way three/four-segment earphone insertion (black) | ||||||
| 1*MIC pin | Support microphone input (2Pin,1*2Pin,2.0mm) | ||||||
| 1*INT_SPK pin | Power amplifier pin, support 8 ohm 5 watt speaker dual-channel output (4Pin,1*4Pin,2.0mm) | ||||||
| USB function | 2*USB2.0 port | Rear standard USB2.0 interface | |||||
| 2*USB pin | USB2.0 pins, one set has 1*USB2.0 (4Pin,1*4Pin,2.0mm) | ||||||
| 1*J5 USB pin | USB2.0 pins, one set has 2*USB2.0 (10Pin,2*5Pin,2.0mm) | ||||||
| Switch function | SW1 button | reset button | |||||
| SW2 button | Power switch button | ||||||
| SW3 button | Enter MASKROM forced burning mode | ||||||
| RECOVER1 button | Enter RECOVER1 mode or USB LOADER upgrade mode | ||||||
| Other I/O | 1*COM1 pin | Debug serial port, optional support TTL (4Pin,1*4Pin,2.0mm) | |||||
| 1*COM2/3/4 pin | Serial port supports RS232 (4Pin,1*4Pin,2.0mm) | ||||||
| 2*GPIO pin | Standard GPIO pins (6Pin,1*6Pin,2.0mm) | ||||||
| 1*TP1 pin | Support touch screen devices (6Pin,1*6Pin,2.0mm) | ||||||
| 1*USB_OTG pin | Jump to pins 1-2, USB1 supports host mode, jump to pins 2-3 and USB1 is Device mode (3Pin,1*3Pin,2.0mm)) | ||||||
| 1*SIM_CARD slot | Support SIM card, SIM card is required when using 3G/4G | ||||||
| 1*BAT1 | Battery casing | ||||||
| 1*SD | data storage | ||||||
| 1*J3 port | Support Camera device | ||||||
| 1*LED1 | Power status indicator | ||||||
| 1*LED2/3 | NIC status indicator | ||||||
| 1*IR | Support wireless data transmission | ||||||
| Other functions | Support power on, remote shutdown intelligent identification of equipment, hardware reset function (256 levels, 0~255 seconds) | ||||||
| Operating environment | Working temperature: -20ºC~60ºC, working humidity: 5%~95% relative humidity, non-condensing | ||||||
| operating system | Android 7.1 system | ||||||
Product Uses
){kind=link}