Customization: | Available |
---|---|
Integrated Graphics: | Integrated Graphics |
Main Chipset: | Intel |
Still deciding? Get samples of US$ 1/piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
CPU brand | CPU model | Frequency | Maximum Turbo Frequency | CPU Power Consumption | The full load power consumption of the whole board is about |
Intel Core | i3-N300 | 8Cores 0.8G | 3.80G | 7W | 20W |
i3-N305 | 8Cores 1.8G | 3.80G | 15W | 40W | |
Intel | N50 | 3.40G | 6W | 20W | |
N95 | 4Cores 1.7G | 3.40G | 15W | 40W | |
N97 | 4Cores 2.0G | 3.60G | 12W | 35W | |
N100 | 4Cores 0.8G | 3.40G | 6W | 20W | |
N200 | 4Cores 1.0G | 3.70G | 6W | 20W |
Motherboard size | 146mm(L)*102mm(W)*23mm(H) | |
CPU processor | Support Intel Alder Lake-N series N200, N100, N97, N95, i3-N305, etc. | |
Memory support | 1*NB-DDR5 SODIMM memory slot, supports 4800MT/s memory, maximum supports 16GB | |
power supply | 1*DC_IN | Supports 12V~24V wide voltage power supply, DC head inner diameter is 2.5MM The motherboard power consumption is about 30W when fully loaded. It is recommended to use a 12V/4A or 24V2A power supply or above |
Can be changed to 1*ATX (4Pin) | ||
Display functions | Intel UHD Graphics, supports single display, dual display/triple display duplication, dual display/triple display expansion, and dual display under SHELL; | |
1*HDMI 2.1 interface | 4K resolution 4096/3840*2160@60Hz | |
1*DP interface | DP does not support DP++, supports 4K resolution 4096/3840*2160@60Hz | |
1*LVDS/EDP1 pin | Support resolution 1920*1080@60Hz (30Pin,2*15Pin,2.0mm) | |
1*VCC_SEL pin | LVDS/EDP1 voltage control pin (6Pin,2*3Pin,2.0mm) | |
1*BKLT_CONN pin | LVDS backlight switch control pin (6Pin,1*6Pin,2.0mm) | |
LVDS and EDP1 are optional, share pins, EDP1 does not support 4K resolution, use EDP-B screen cable | ||
1*Type_C interface | Support display and USB data transmission | |
1*MIPI interface | Support CSI-2 protocol and MIPI camera devices | |
Network Features | 1/2*RJ45 LAN interface | Dual network: supports Realtek 8111H+Realtek 8111H Gigabit network card by default; optional domestic Yutaiwei YT6801+Yutaiwei YT6801 Gigabit network card; Single network: supports Realtek 8111H Gigabit network card; optional domestic Yutaiwei YT6801 Gigabit network card; supports network wake-up and PXE diskless boot function |
1*M2-WIFI interface | Support PCIE3.0 signal, support Key-E interface M.2 2230 WiFi Bluetooth module | |
Hard disk function | 1*NGFF interface | Support PCIE3.0 signal, support Key-M interface M.2 2280 hard disk; Support NVME protocol and SATA protocol coexistence by default, automatic switching. |
Sound Features | Default support for Realtek ALC897 HD digital audio decoder, 6-channel high-fidelity audio controller | |
1*FRONT_SPK interface | Supports LINE_OUT output, but not MIC_IN input | |
1*F_AUDIO pin | Standard audio pin (9Pin,2*5Pin,2.0mm) | |
1*JAMP pin | The amplifier supports 8 ohm 5 watt speaker dual channel output (4Pin,1*4Pin,2.0mm) | |
USB Function | 2*USB3.2 interface | Rear standard USB3.2 Gen1 interface, maximum transmission bandwidth is 5Gbps |
2*USB2.0 interface | Rear standard USB2.0 interface, maximum transmission bandwidth is 480Mbps (dual network motherboard does not have this interface) | |
1*F_USB3_A pin | Front USB3.2 pin, one set has 2*USB3.2 (19Pin,2*10Pin,2.0mm) | |
1*F_USB1 pin | Front USB2.0 pin, one set has 2*USB2.0 (9Pin,2*5Pin,2.0mm) | |
1*F_USB2 pin | Front USB2.0 pin, one set has 2*USB2.0 (9Pin,2*5Pin,2.0mm) | |
1*Type_C interface | Support display and USB data transmission | |
Switch function | 1*F_PANEL pin | Switch, power light, hard disk light, restart pin (9Pin,2*5Pin,2.0mm) |
1*JATX pin | Hardware control power on pin (3Pin,1*3Pin,2.0mm) | |
Other IO | 1*COM1 pin | Serial port, COM1 supports RS232/RS422/RS485 optional (9Pin,2*5Pin,2.0mm) |
1*COM2 pin | Serial port, supports standard RS232 (9Pin,2*5Pin,2.0mm) | |
1*COM3-6 pin | Serial port, supports standard RS232 (39Pin,2*20Pin,2.0mm) | |
All serial ports can be modified to support TTL | ||
1*JCOM1/2 pin | Can control the ninth pin voltage of COM1/2 to 0V/5V/12V (6Pin,2*3Pin,2.0mm) | |
1*CLR_CMOS pin | Mainboard reset and discharge pins (2Pin,1*2Pin,2.0mm) | |
1*FAN1 pin | CPU fan pin, supports temperature control (3Pin,1*3Pin,2.54mm) | |
1*GPIO_CN pin | GPIO control pins (10Pin,2*5Pin,2.0mm) | |
Operating Environment | Working temperature: -10ºC~60ºC; Working humidity: 5%~95% relative humidity, no condensation | |
BIOS | AMI BIOS, supports scheduled startup, remote power on/off, and intelligent device identification | |
Watch Dog | Watchdog programming, support hardware reset function (256 levels, 0~255 seconds) | |
Os | Supports Windows 11, Windows 10, Linux, etc. (N100 and i3-N300 do not support Windows 11) |
Packaging
Before delivery,we guarantee that every item will be tested and carefully packed with individual Anti-static bubble bag and separated by stiff cardboards in carton boxes.
1Piece/Carton(G.W. : 1.0-1.5KG);
5Pieces/Carton(G.W. : 5.0-7.5KG);
10Pieces/Carton(G.W. : 10.0-15.0KG);
Shipping
3 working days after received full payment(In stock).
Express:DHL,Fedex,UPS,TNT,etc.
Company Informaton
In the year of 2009,Shenzhen Elsky Technology Co.,Ltd. is specially engaged in the research,production and sales of all kinds of mini-ITX motherboard and mini PC for POS,ALL-IN-ONE PC,Digital signage,Advertising LCD Player,Network,Telecommunication and other industries.Meanwhile,we have OEM/ODM service for global customers.
As a motherboard and mini PC manufacturer, ELSKY concern with the design,development and production more than 10 years, We won the CCTV Securities Information Optimizing Brand and the members of Intel Intelligent Manufacture in China and the member of Intel IoT Solutions Alliance.