| Customization: | Available |
|---|---|
| CPU: | Alder Lake-N N200 N100 N97 N95 I3-N305 |
| COM: | 2 |
|
Still deciding? Get samples of US$ 275/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Motherboard Model | NANO1F | |
| Size | 120mm(L)*120mm(W)*27mm(H) | |
| CPU | Supports Intel Alder Lake-N series N200, N100, N97, N95, i3-N305, etc | |
| RAM | 1 * NB-DDR4 SODIMM memory slot, supports single channel 3200MHz memory, low voltage 1.2V, maximum support 16GB | |
| Power Supply | 1*DC_JACK | Supports 12-24V wide voltage power supply, with a DC head inner diameter of 2.5MM The full load power consumption of the motherboard is about 30W. Suggest using a 12V/4A or higher power supply |
| 1*DC_PWR(Optional) | ||
| DC-IN and DC_TX are two options, and the motherboard supports DC-IN by default | ||
| Display function | Intel UHD Graphics,Support single display, dual display/triple display replication, dual display/triple display expansion | |
| 1*HDMI1 2.0 Interface | Supports 4K resolution of 4096/3840* 2160@60Hz | |
| 1*VGA DB15 Interface | Supports a resolution of 1920* 1080@60Hz | |
| 1*HDMI 2.0 Interface(Optional) | Supports 4K resolution of 4096/3840* 2160@60Hz | |
| VGA Interface Can be modified to support HDMI Interface | ||
| 1*LVDS/EDP Pin | Supports a resolution of 1920* 1080@60Hz (30Pin,2*15Pin,2.0mm) | |
| 1*VCC_SEL Pin | LVDS/EDP Pin for voltage control (6Pin,2*3Pin,2.0mm) | |
| 1*BKLT_CONN Pin | LVDS/EDP1 Backlight switch control pin (6Pin,1*6Pin,2.0mm) | |
| The motherboard has a choice between LVDS and EDP. LVDS is supported by default, but EDP can be changed to use EDP-B screen cable | ||
| Network function | 1/2*RJ45 LAN Interface | Single network: default Realtek 8111H Gigabit Ethernet card; Optional Yutaiwei YT6801 Gigabit Ethernet Card; Dual network: supports Realtek 8111H+Realtek 8111H Gigabit Ethernet cards; Optional Yutaiwei YT6801+Yutaiwei YT6801 Gigabit Network Card; Support network wake-up and PXE diskless boot function |
| 1*M2_WIFI Interface | PCIE3.0 signal, supports Key-E Interface M.2 2230 WiFi Bluetooth module | |
| Hard disk function | 1*NGFF(M.2) Interface | PCIE3.0 signal, supports Key-M Interface default M.2 2280 hard drive, supports NVME (PCIE) protocol by default, hardware can be changed to support SATA protocol |
| 1*SATA1 Interface | Standard SATA 3.0 hard drive interface, maximum transfer speed of 6.0 Gbps | |
| 1*SATA_PWR1 Pin | The hard drive power supply pin can be powered by 5V or 12V. (4Pin,1*4Pin,2.54mm) | |
| Sound function | Integrated Realtek ALC897 HD digital audio decoder, 6-channel high fidelity audio controller | |
| 1*LIN_OUT Interface | Supports audio output (green) | |
| 1*MIC_IN Interface | Supports microphone input (red) | |
| 1*JAMP Pin | The amplifier supports dual channel output with 8 ohms and 5 watts speakers (4Pin,1*4Pin,2.0mm) | |
| 1*F_AUDIO Pin | Standard audio Pin (9Pin,2*5Pin,2.0mm) | |
| USB function | 2*USB3.2 Interface | Rear standard USB 3.2 Geni Interface, with a maximum transmission bandwidth of 5Gbps |
| 4*USB2.0 Interface | Rear standard USB 2.0 interface, with a maximum transmission bandwidth of 480Mbps | |
| 1*F_USB1 Pin | Front USB 2.0 pins, one set with 2 * USB 2.0 (9Pin,2*5Pin,2.0mm) | |
| 1*F_USB2 Pin | Front USB 2.0 pins, one set with 2 * USB 2.0 (9Pin,2*5Pin,2.0mm) | |
| Switch function | 1*F_PANEL Pin | Switch, power light, hard disk light, restart pin (9Pin,2*5Pin,2.0mm) |
| 1*PWR_SW Button | switch button | |
| 1*JATX Pin | Support hardware control for power on and startup (3Pin,1*3Pin,2.0mm) |
|
| Other I/O | 1*COM1 Pin | Serial port, only supports RS232 (9Pin,2*5Pin,2.0mm) |
| 1*COM2 Pin | Serial port, optional support for RS232/RS422/RS485 (9Pin,2*5Pin,2.0mm) | |
| 1*JPCOM1/2 Pin | Control COM1/2 pin 9 voltage 0V/5V/12V optional (6Pin,2*3Pin,2.0mm) | |
| 1*CLR_CMOS Pin | Clearing the motherboard and discharging pins (2Pin,1*2Pin,2.54mm) |
|
| 1*CPU_FAN Pin | CPU Fan Pin, supports temperature control (4Pin,1*4Pin,1.25mm) | |
| 1*GPIO_CN Pin | Standard GPIO Pin (10Pin,2*5Pin,2.0mm) | |
| 1*J1 Pin | Debugging Pin (10Pin,2*5Pin,2.0mm) | |
| 1*J2 Pin | Devices that support SPI protocol or I2C protocol (10Pin,2*5Pin,2.0mm) | |
| Operating environment | Working temperature: -10 ºC~60 ºC; Working humidity: 5%~95% relative humidity, no condensation | |
| BIOS | AMI BIOS,Support power on, timed power on, and intelligent recognition of remote power on/off devices | |
| Watch Dog | Watchdog programming, supports hardware reset function (256 levels, 0-255 seconds) | |
| operating system | Supports Windows 11, Windows 10, Linux, etc (N100 and i3-N300 do not support Windows 11) |
|
Packing
Before delivery,we guarantee that every item will be tested and carefully packed with individual Anti-static bubble bag and separated by stiff cardboards in carton boxes.
1Piece/Carton(G.W. : 1.0-1.5KG);
5Pieces/Carton(G.W. : 5.0-7.5KG);
10Pieces/Carton(G.W. : 10.0-15.0KG);
){kind=link}